oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

ABOUT US
Emergency Contact Module > < Alarm Module, (Vehicle Antitheft)|Service and Repair|Page 7

Intrigue V6-3.8L VIN K (1998)

Page 1
background image

Antitheft Relay: Service and Repair

REMOVAL PROCEDURE

IMPORTANT:  The theft deterrent relay is located in the underhood electrical center, in position number ii labeled CRANK.

1. Open the hood.
2. Remove the underhood electrical center cover.
3. Remove the theft deterrent relay by pulling out.

INSTALLATION PROCEDURE

1. Install the theft deterrent relay by aligning the relay terminals and pressing into place until fully seated.
2. Install the underhood electrical center cover.
3. Close the hood.

Emergency Contact Module > < Alarm Module, (Vehicle Antitheft)|Service and Repair|Page 7