Data
- Make
- Peugeot
- Model
- J5 Factory Workshop Manual
- Year
- 1982–1994
- Section
- Complete assembly – identification - data › Data
SteeringData · page 1 of 2
DATA
| Diameter of steering wheel | 430 mm |
| Number of turns, stop to stop | 4 turns 4/10 |
| Upper universal joint | with double spline |
| Inner universal joint | 54 splines* |
| Number of pinion teeth | 5 ▲▲ |
| Number of rack teeth | 25 ▲▲ |
| Damper clearance | see section D2, xxx |
| Reduction ratio | 25,2 : 1 |
| Grease, grade | KLUBER AKCS no routine lubrication |
* See removing - refitting the steering rack.
TIGHTENING TORQUES
| m.daN | lbf ft | |
|---|---|---|
| Steering wheel to upper shaft | 5 | 37 |
| Damper lock nut | 6 | 44 |
| Steering column housing to body | 4 | 30 |
| Other torques | see fig. 1 (torques marked with an oval) | |
| 2,5 | 18 | |
| 12,5 | 92 | |
Parts & tools for this job For 1982 Peugeot J5
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Peugeot power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.