Alignment (Camber): Service and Repair
- Make
- Plymouth
- Model
- Colt
- Engine
- L4-1468cc 1.5L SOHC
- Year
- 1987
- Section
- Alignment › Service and Repair › Camber
MaintenanceCamber · page 1 of 4
Alignment: Service and Repair
Camber
FRONT
The specified camber is built into the steering knuckle, which is part of the strut assembly, and no adjustment is provided.
REAR
Rear camber is pre-set during vehicle assembly and cannot be adjusted. If camber is not within specifications, check for worn or damaged suspension
component, and damaged or deformed floor pan or body and repair as needed.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1987 Plymouth Colt 1.5L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Plymouth power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.