plymouth Workshop Repair Guides

Plymouth Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 3
background image

1-C.

4.

Route and secure the overlay harness, PN 4362295, along the existing headlamp-to-dash main wiring harness to the bulkhead connector
using the existing wiring clips and six tie wraps, PN 6015756, as shown in Figure 1-A. Loop and tape any excess wire of the overlay
harness as illustrated.

5.

Coat the bare blade terminal of the overlay harness liberally with Mopar General Multi-Purpose Grease, PN 4318063, and snap into
cavity #39 (cavity #27 for 1981 model year vehicles only) of the engine side of the bulkhead connector (Figure 1-D).

B.Instrument Panel Harness Pn 4331718

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: > 184986 > Sep > 86 > Fuel System- Engine Vapor Lock > Page 18

< PREV PAGE NEXT PAGE >