Grand Voyager V6-3.0L VIN 3 (1998)
Removing/Installing Caliper
19. Carefully lower caliper and brake shoes over rotor and onto the adapter using the reverse procedure for removal.
CAUTION: When installing guide pin bolts extreme caution should be taken not to cross-thread the caliper guide pin bolts.
Removing Caliper Guide Pin Bolts
20. Install the caliper guide pin bolts. Tighten the guide pin bolts to a torque of 22 Nm (192 inch lbs.).
Hub Nut and Washer
21. Clean all foreign material off the threads of the outer C/V joint stub shaft. Install the washer and hub nut on the stub shaft of the outer C/V joint.
22. Set the parking brake.
23. Tighten the hub nut to a torque of 244 Nm (180 ft. lbs.).
