Grand Voyager V6-3.8L VIN L (1999)
Turn Signal Switch: Testing and Inspection
To test turn signal, headlamp beam select and optical horn portion of the multi-function switch:
1. Remove the multi-function switch, refer to removal procedures.
Turn Signal - Multi-Function Switch Pin Numbers
2. Using an ohmmeter check continuity reading between multi-function switch pins. Refer to the above image for proper pin numbers and Turn
Signal Multi-Function Switch Test table.
TURN SIGNAL / MULTI-FUNCTION SWITCH TEST TABLE
Switch position = Continuity Between
Left = 4 and 8
Right = 3 and 8
Hazard = 1 and 8
LO beam = 9 and 10
HI beam = 9 and 12
