Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Body and Frame > Doors, Hood and Trunk > Hood > Hood Switch / Sensor > Hood Sensor/Switch (For Alarm) > Component Information > Service and Repair

Page 1
background image

Hood Sensor/Switch (For Alarm): Service and Repair

REMOVAL

1. Release the hood latch and open the hood.
2. Using a small flat blade screws driver, pry hood ajar switch from the bracket.

Hood Ajar Switch

3. Disconnect the wire connector from the hood ajar switch and remove the switch.

INSTALLATION

-

For installation, reverse the above procedure.

Body and Frame > Doors, Hood and Trunk > Hood > Hood Switch / Sensor > Hood Sensor/Switch (For Alarm) > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]