Prowler V6-3.5L VIN G (1999)
maintained, a good bleed of the hydraulic system to the left rear wheel has been obtained.
6. Repeat the procedure at all the other remaining bleeder screws. Then check the pedal for travel. If pedal travel is excessive or has not been
improved, enough fluid has not passed through the system to expel all the trapped air. Be sure to monitor the fluid level in the pressure bleeder, so
it stays at a proper level so air will not enter the brake system through the master cylinder.
7. Test drive the vehicle to be sure the brakes are operating correctly and that a solid brake pedal has been obtained.
