Plymouth Workshop Manuals
Prowler V6-3.5L VIN G (1999)
Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Pan, Engine > Component Information > Service and Repair > Removal and Installation > Page 1378
Oil Pan: Service and Repair
1. Clean oil pan in solvent and wipe dry with a clean cloth. Clean all gasket material from mounting surfaces of pan and block.
Replace if necessary. Tighten to 27 Nm (20 ft. lb.).
3. Inspect oil pan mounting flange for bends or distortion. Straighten flange if necessary.
Windage Tray/Oil Pan Gasket
The windage tray and oil pan gaskets are integral. The silicone rubber gaskets are bonded to both sides of the windage tray. This assembly is
CAUTION: Sealant must be carefully removed if gasket is to be used again.
|[PREV PAGE] [NEXT PAGE]|