Do Not Sell My Personal Information
plymouth Workshop Repair Guides

Plymouth Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

4. Install exhaust system and exhaust support isolators.
5. Tighten Band clamps to 54 Nm (40 ft. lbs.).
6. Install downstream oxygen sensor(s) and tighten to 28 Nm (20 ft. lbs.).
7. Lower vehicle.
8. Connect negative battery cable.

Engine, Cooling and Exhaust > Exhaust System > Catalytic Converter > Component Information > Specifications > Page 1636

< PREV PAGE NEXT PAGE >