Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Instrument Panel, Gauges and Warning Indicators > Instrument Cluster / Carrier > Instrument Panel Circuit Board > Component Information > Service and Repair > Fuel and Temp PC Board > Page 5183

Page 1
background image

Instrument Panel Circuit Board: Service and Repair
Oil Gauge PC Board

REMOVAL

1. Open hood.
2. Disconnect and isolate the negative battery cable.
3. Remove cluster. Refer to Instrument Cluster Removal and Installation.
4. Remove four cluster back cover retaining screws and remove the cover.
5. Remove the speedometer printed circuit board.

Oil Gauge PC Board

6. Remove two oil gauge printed circuit board attaching screws.
7. Remove PC board.

INSTALLATION

-

For installation, reverse the above procedures.

Instrument Panel, Gauges and Warning Indicators > Instrument Cluster / Carrier > Instrument Panel Circuit Board > Component Information > Service and Repair > Fuel and Temp PC Board > Page 5183

[PREV PAGE] [NEXT PAGE]