Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Instrument Panel, Gauges and Warning Indicators > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Specifications > Page 5258

Page 3
background image

Fig. 32 Fuel/Pump/Level Sensor Electrical Connector

4. Install level sensor wires in connector. Push the wires up through the connector and then pull them down until they lock in place. Ensure signal and

ground wires are installed in the correct position.

5. Install locking wedge on connector.
6. Push connector up into bottom of fuel pump module electrical connector.
7. Install fuel pump module.

Instrument Panel, Gauges and Warning Indicators > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Specifications > Page 5258

[PREV PAGE] [NEXT PAGE]