Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Powertrain Management > Computers and Control Systems > Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > Component Information > Locations > Page 2232

Page 2
background image

WARNING: DO NOT ALLOW OHMMETER TO CONTACT TERMINALS 85 OR 86 DURING THIS TEST.

7. Attach the other end of the jumper wire to relay terminal 86. This activates the relay. The ohmmeter should now show continuity between relay

terminals 87 and 30. The ohmmeter should not show continuity between relay terminals 87A and 30.

8. Disconnect jumper wires.
9. Replace the relay if it did not pass the continuity and resistance tests. If the relay passed the tests, it operates properly. Check the remainder of the 

ASD and fuel pump relay circuits.

Powertrain Management > Computers and Control Systems > Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > Component Information > Locations > Page 2232

[PREV PAGE] [NEXT PAGE]