Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Pump Pickup Filter > Component Information > Service and Repair > Fuel Pump Module Replacement

Page 1
background image

Fuel Pump Pickup Filter: Service and Repair
Fuel Pump Module Replacement

FUEL PUMP MODULE

Fuel Pump Access Panel

The trunk has an access cover in the floor panel for servicing the fuel pump module.

WARNING: RELEASE FUEL SYSTEM PRESSURE BEFORE REMOVING THE FUEL PUMP MODULE. REFER TO THE FUEL
PRESSURE RELEASE PROCEDURE.

REMOVAL

1. Release fuel system pressure. Refer to Fuel Pressure Release Procedure.

See: Fuel Filter/Fuel Pressure Release/Service and Repair

2. Disconnect negative cable from battery.
3. Open deck lid. Move trunk liner.
4. Remove access panel fasteners.

Fuel Pump Access

5. Remove access panel and gasket. Inspect gasket for damage. If necessary, replace gasket.
6. Disconnect electrical connector from top of pump module.
7. Disconnect fuel tubes from fuel pump module. Refer to Quick-Connect Fittings.

See: Fuel Line Coupler/Service and Repair

Powertrain Management > Fuel Delivery and Air Induction > Fuel Pump Pickup Filter > Component Information > Service and Repair > Fuel Pump Module Replacement

[PREV PAGE] [NEXT PAGE]