Prowler V6-3.5L VIN G (1999)
Tie Rod End: Service and Repair
REMOVE
1. Raise vehicle on jackstands or centered on a hoist.
NOTE: When removing the center cap from the wheel do not use a sharp or hard tool. Use of such a tool can mare the finish on the wheel and
damage the center cap.
2. Remove the center cap from the wheel. Center cap is removed by inserting a trim stick into the notch on the center cap and prying it off the wheel.
3. Remove wheel and tire from vehicle.
4. Remove the 3 nuts mounting the front fender bracket to the steering knuckle. Remove front fender from the steering knuckle.