Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


Prowler V6-3.5L VIN G (1999)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Seals and Gaskets, A/T > System Information > Technical Service Bulletins > A/T Pan Gasket - Reusable Design/Installation > Page 3238

Page 2
background image

CAUTION:

ALUMINUM COMPONENTS ARE VERY SUSCEPTABLE TO METAL TRANSFER WHEN OLD GASKET MATERIAL IS REMOVED
FROM THEM. USE EXTREME CARE WHEN CLEANING THESE COMPONENTS.

5.

Apply thin coat of transmission fluid to oil pan and transmission case pan rails.

6.

Orient reusable gasket properly with bolt holes and assemble oil pan and gasket to transmission case. Tighten oil pan bolts to 19 Nm (165 in lbs.).

7.

Refill transmission to the proper level with MOPAR ATF + 3 Type 7176, p/n 05010124AA, or MOPAR ATF +4 Type 9602, p/n 05013457AA,
for 1999 JA/LH/PR vehicles.

CAUTION:

DO NOT OVERFILL TRANSAXLE. DO NOT ADD OIL IF LEVEL IS BETWEEN: LOWER HOLES FOR WARM OIL (100°F). UPPER
HOLES FOR HOT OIL (180°F.).

Transmission and Drivetrain > Automatic Transmission/Transaxle > Seals and Gaskets, A/T > System Information > Technical Service Bulletins > A/T Pan Gasket - Reusable Design/Installation > Page 3238

[PREV PAGE] [NEXT PAGE]