Do Not Sell My Personal Information
plymouth Workshop Repair Guides

Plymouth Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Selector Shaft: Service and Repair

REMOVAL

1. Disconnect the shift cable from the shift lever (at the transaxle).
2. Move the shift lever clockwise as far as it will go. This should be one position past the L position.
3. Remove the shift lever.

INSTALLATION

1. For installation, reverse removal procedure.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Linkage, A/T > Selector Shaft, A/T > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >