pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Engine - Oversize Tappet Bores|Page 1343 > < Camshaft Removal/Installation - Overhead Cam|Page 1338
Page 1
background image

Lifter / Lash Adjuster: Technical Service Bulletins
Engine - Oversize Tappet Bores

Number 84-6 (Gasoline)-9A

Date 12/83

Subject:

OVERSIZE TAPPET BORES - 1983-84 2.0L LQ5 J2000 ENGINES

"Please discard previous bulletin 84-6 (Gasoline)-9".

Some Tonawanda built 2.0L L-4 LQ5 engines may have been produced with 0.26 mm oversize tappet bores. The oversize tappet bore is identified with a
vertical stripe of white paint on both sides of the tappet bore inside the tappet cavity. In addition, the cylinder block has a steel stamp with ".26 OS" on
the top right front machining pad. If one of the oversize hydraulic valve lifters requires replacement, use part number 5233545.

Engine - Oversize Tappet Bores|Page 1343 > < Camshaft Removal/Installation - Overhead Cam|Page 1338