Aztek AWD V6-3.4L VIN E (2004)
Sunroof / Moonroof Switch: Removal and Replacement
Sunroof Switch Replacement
Removal Procedure
1. Use a small flat-bladed tool to disengage the retainer clips located at the front and rear of the power sunroof switch. Hold the flat-bladed tool
parallel to the roof and push straight in.
2. Rotate the power sunroof switch toward the left side to disengage the retainer clips from the mounting bracket and pull down.
3. Disconnect the electrical connector from the power sunroof switch.
4. Remove the power sunroof switch from the bezel.
Installation Procedure
