pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

All Other Service Bulletins for EGR Valve: > < Engine - Tip In Hesitation
Page 1
background image

EGR Valve: All Technical Service Bulletins
Engine - Tip In Hesitation

Number 82-T-101

Section 6

Date 3/84

Subject:

NEW PROM AND EGR VALVE FOR 5.0L CFI ENGINE (CODE 7) TO PREVENT "TIP IN" HESITATION ON FEDERAL E

If a customer should comment on a "tip in" hesitation with their 1982 5.0L CFI engine, a new ECM calibration PROM, Part Number 1225588, and EGR
valve, Part Number 17079818, have been made available to correct this condition.  Prior to replacing the PROM and EGR valve, the following checks
are to be performed.

1.

Disconnect the EGR valve vacuum line at the EGR valve and plug vacuum line.

2.

Drive the vehicle and evaluate tip in hesitation.

3.

If tip in hesitation persists, refer to shop manual for problem diagnosis.

4.

If tip in hesitation is eliminated, replace the calibration PROM and EGR valve with part numbers indicated above.

Use applicable labor operation.

All Other Service Bulletins for EGR Valve: > < Engine - Tip In Hesitation