pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

All Technical Service Bulletins: > < EGR Electronic Vacuum Regulator Solenoid|Testing and Inspection
Page 1
background image

EGR Valve: Customer Interest
Engine - Tip In Hesitation

Number 82-T-101

Section 6

Date 3/84

Subject:

NEW PROM AND EGR VALVE FOR 5.0L CFI ENGINE (CODE 7) TO PREVENT "TIP IN" HESITATION ON FEDERAL E

If a customer should comment on a "tip in" hesitation with their 1982 5.0L CFI engine, a new ECM calibration PROM, Part Number 1225588, and EGR
valve, Part Number 17079818, have been made available to correct this condition.  Prior to replacing the PROM and EGR valve, the following checks
are to be performed.

1.

Disconnect the EGR valve vacuum line at the EGR valve and plug vacuum line.

2.

Drive the vehicle and evaluate tip in hesitation.

3.

If tip in hesitation persists, refer to shop manual for problem diagnosis.

4.

If tip in hesitation is eliminated, replace the calibration PROM and EGR valve with part numbers indicated above.

Use applicable labor operation.

All Technical Service Bulletins: > < EGR Electronic Vacuum Regulator Solenoid|Testing and Inspection