pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

A/T - Forward Sprag Clutch Service Information|Page 3286 > < A/T - New Design Selective Washer
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - Forward Sprag Clutch Service Information

Number

83-I-136 Section 7 Date 08/83

Subject:

SERVICE INFORMATION FOR THE FORWARD SPRAG CLUTCH - THM 700-R4 (ALL)

Beginning May 3, 1982, a new forward sprag clutch entered production replacing the forward roller clutch on all THM 700-R4 transmissions.

To minimize the number of service parts required in inventory, only the new forward sprag clutch parts are serviced as follows:

Figure 1

A.. If any of the following parts require replacement on a transmission built with a roller clutch, order service package 8642947 (see Figure 1).

Hub, Overrun Clutch (#2)

Race, Forward Clutch-Outer (#5)

Cam, Forward Roller (#3)

Gear, Input Sun (#6)

Roller Assembly, Forward Clutch (#4)

Carrier Assembly, Input-Complete (#8)

NOTICE:

Overrun Clutch Hub Retaining Snap Ring (#l) and Input Carrier To Race Thrust Washer (#7) still available individually for service (see
"B." on reverse side).

Figure 1

Service package 8642947 is a sprag conversion kit which contains the following parts (refer to Figure 1):

Snap Ring, Overrun Clutch Hub Retaining (#638)

Race, Forward Clutch-Outer (#644)

Hub, Overrun Clutch (#639)

Gear, Input Sun (#658)

Wear Plate, Sprag Assembly (#640)

Washer, Thrust (Input Carrier To Race) (#660)

Retainer & Race Assembly, Sprag (#641)

Carrier Assembly, Input-Complete (#662)

Forward Sprag Assembly (#642)

Instruction Sheet

A/T - Forward Sprag Clutch Service Information|Page 3286 > < A/T - New Design Selective Washer