pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Audio - Power Antenna Above Fender Mast Section R&R|Page 6440 > < Audio - Power Antenna Above Fender Mast Section R&R
Page 2
background image

ANTENNA MAST SECTION REPLACEMENT
MAST SECTION REMOVAL

1.

If antenna is fully down, have a helper turn radio on (ignition key in ACC position). When finial is extended approximately 25.4 mm (1 inch),
immediately disconnect power (either remove fuse or unplug power lead from relay).

2.

If antenna is above fender, disconnect power per Step 1.

FIGURE 1 - FRONT MOUNTED ANTENNA

3.

A. Front mounted (Figure 1). Remove mounting nut with appropriate tool, then remove mounting wedge. Remove insulator stop using tool if
provided, or an 11 mm thin wall, extra deep well, 12 point socket.

FIGURE 2 - FRONT MOUNTED ANTENNA

B.

Front mounted (Figure 2). Remove mounting nut with tool provided.

Audio - Power Antenna Above Fender Mast Section R&R|Page 6440 > < Audio - Power Antenna Above Fender Mast Section R&R