pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Relays and Modules - HVAC > < Cruise Control Module|Locations|Page 133
Page 2
background image

d. Remove front lower deflector by sliding outward from radiator lower deflector and wheel house panel liner.

3. Remove cruise control cover to access connectors, then disconnect electrical connector from cruise control module.
4. Disconnect cruise control cable from module, then remove bolts and screws.
5. Remove module with bracket, Fig. 35, then module from bracket.
6. Reverse procedure to install noting the following:

a. Torque cruise control module to bracket screws and bolts to 53 ft. lbs.
b. Torque cruise control module to left engine compartment inner side rail screws and bolts to 89 ft. lbs.
c. Torque radiator air lower deflector and front lower deflector screws and bolts to 49 ft. lbs.
d. Torque accelerator cable splash shield screws and bolts to 17 ft. lbs.

Relays and Modules - HVAC > < Cruise Control Module|Locations|Page 133