G6 L4-2.4L (2007)
Notice: Refer to Fastener Notice.
5. Install the valve body bolts (374-381, 384).
^
Tighten the M6 X 1.0 X 20 bolt (381) to 8 N.m (70 lb in).
^
Tighten the M6 X 1.0 X 30 bolt (376) to 12 N.m (106 lb in).
^
Tighten the M6 X 1.0 X 45 bolt (377) to 12 N.m (106 lb in).
^
Tighten the M6 X 1.0 X 55 bolt (378) to 12 N.m (106 lb in).
^
Tighten the M6 X 1.0 X 60 bolt (375) to 12 N.m (106 lb in).
^
Tighten the M6 X 1.0 X 65 bolt (374) to 12 N.m (106 lb in).
^
Tighten the M6 X 1.0 X 85 bolt (384) to 12 N.m (106 lb in).
^
Tighten the M6 X 1.0 X 90 bolt (379) to 16 N.m (12 lb ft).
^
Tighten the M8 X 1.0 X 90 bolt (380) to 25 N.m (18 lb ft).
6. Install the oil pump.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The engine control module (ECM),
powertrain control module (PCM) or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions.
7. Install the case side cover.