G6 L4-2.4L (2007)
Valve Body: Service and Repair
6T70/6T75 - Automatic Transmission
Control Valve Body Cover Replacement
Control Valve Body Cover Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the oil cooler inlet and outlet hoses from the retainer on the control valve body cover.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement - Left Side.
5. Remove the left front fender liner.
6. Remove the front air dam.
7. Remove the front transmission mount.
8. Remove the lower nuts from the left transmission mount.
9. Drain the transmission. Refer to Transmission Fluid Replacement.