G6 V6-3.6L (2007)
Figure 1
1. Install 28 Mylar washers to the mounting bolts/fasteners. Drop the headliner enough to access these attachments, being careful not to bend or
damage the headliner while performing the following procedure. Loosen all four front module mounting bolts (refer to figure 1). Verify that the
screws are not engaged into the roof.
Figure 2
2. Install 8 of 28 Mylar washers, two on each of the front four compensators (refer to figure 1 & 2). Figure 3A
Always retract the barrel (down) to begin reinstallation process.Figure 3B