G6 V6-3.6L (2007)
Removal Procedure
1. Remove the lower intake manifold with the upper manifold. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
2. Remove the left camshaft cover. See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Valve Cover/Service and Repair
3. Remove the left intake and exhaust camshaft position sensors. See: Camshaft Position Sensor/Service and Repair
4. Remove the left intake and exhaust camshaft position actuator solenoid. See: Variable Valve Timing Solenoid/Service and Repair
Important: Rotate the crankshaft balancer bolt in a clockwise direction ONLY.
5. Rotate the crankshaft balancer using the balancer bolt until the camshafts are in a neutral (low tension) position. The camshafts will be parallel
with the camshaft cover rail (1).