G6 V6-3.9L (2009)
Note: Note the position of the springs on the cable eyelet screws to ensure proper function of the stowage compartment closeout panels upon
reassembly.
2. From the rear compartment remove the screws and springs which retain the roof retractable stowage compartment closeout panel actuator cable
end eyelets to the right and left folding top side rail links. Refer to Roof Retractable Stowage Compartment Closeout Panel Actuator Cable
Replacement (See: Roof Retractable Stowage Compartment Closeout Panel Actuator Cable Replacement).
3. Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position (See: Locations/Folding Top Retainer
Strap Installation Position).
4. Remove the right and left lock pillar upper garnish moldings. Refer to Lock Pillar Upper Garnish Molding Replacement (Convertible) (See:
Interior Moulding / Trim/Trim Panel/Service and Repair).
5. Remove the rear end trim finish upper panel. Refer to Rear End Trim Finish Upper Panel Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair).
6. Remove the pins (1) and clips (2) retaining the folding top stowage compartment closeout panel link drive rod to the right and left folding top side
rail link arms.