G6 V6-3.9L (2009)
![background image](/pontiac/g6/v6-3.9l/Page-2377011.png)
11. Remove the retractable hydraulic compartment lid cylinder rear lower (2) from the module (1).
12. Remove both upper and lower pins that secure the rotating links to the bodyside plate.
13. Remove the lid hinge assembly with the links still attached from the vehicle.
Installation Procedure
Note: Do Not disconnect the hydraulic lines from the retractable hydraulic compartment lid cylinders when removing the module. If it become
necessary to open the hydraulic lines , refer to Folding Top Cylinder Hose Replacement (See: Convertible Top Hydraulic Hose/Service and
Repair) and Folding Top Hydraulic System Bleeding (See: Service and Repair/Procedures).
1. Install the lid hinge assembly with the links still attached to the vehicle.
2. Install both upper and lower pins that secure the rotating links to the bodyside plate.
3. Install the retractable hydraulic compartment lid cylinder rear lower (2) to the module (1). Refer to Roof Retractable Panel Stowage Compartment
Lid Cylinder Replacement - Rear Lower (See: Roof Retractable Panel Stowage Compartment Lid Cylinder Replacement - Rear Lower).
4. Install the retractable hydraulic compartment lid rear. Refer to Roof Retractable Panel Stowage Compartment Lid Cylinder Replacement - Rear (
See: Roof Retractable Panel Stowage Compartment Lid Cylinder Replacement - Rear).