G6 V6-3.9L (2009)
47. Install a new O-ring (1) onto the cylinder hose (2).
48. Install the hose into the cylinder port (3). Press straight down on the hose until the hose is fully seated in the cylinder.
49. Install a new cylinder hose retainer flex clip (1). Inspect the retainer flex clip to ensure that the flex clip is fully seated around the hose (2).
50. Repeat the replacement procedure for the second hose.
51. Install the appropriate hydraulic cylinder to the mounting location.
52. Install the reservoir filler plug, if removed.
53. Position the hydraulic pump to the correct mounting location if moved.