G6 V6-3.9L (2009)
Air Door Actuator / Motor: Service and Repair
HVAC - Automatic
Air Inlet Valve Actuator Replacement
Air Inlet Valve Actuator Replacement
Removal Procedure
1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
3. If equipped with OnStar, remove the communication interface module. Refer to Communication Interface Module Replacement (See:
Accessories and Optional Equipment/Cellular Phone/Communications Control Module/Service and Repair/Communication Interface Module
Replacement).
4. If equipped, remove the OnStar module bracket. Refer to Communication Interface Module Bracket Replacement (See: Accessories and Optional
Equipment/Cellular Phone/Communications Control Module/Service and Repair/Communication Interface Module Bracket Replacement).
5. Remove the recirculation door actuator screws.