G6 V6-3.9L (2009)
Tighten the bolts to 30 Nm (22 lb ft).
24. Install the transaxle shift cable to the transaxle range selector.
25. Connect the transaxle wiring harness connector.
26. Install the battery. Refer to Battery Replacement (See: Starting and Charging/Battery/Service and Repair).
27. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
Caution: Refer to Transmission Overfill Caution (See: Service Precautions/Transmission Overfill Caution).
28. Check and fill the transaxle as necessary.
29. Inspect for fluid leaks.
Control Valve Body Replacement
Control Valve Body Replacement
Special Tools
J 36850 Transjel Lubricant
Removal Procedure
1. Remove the case side cover. Refer to Control Valve Body Cover Replacement (See: Control Valve Body Cover Replacement).
2. Remove the oil pump. Refer to Oil Pump Replacement (See: Fluid Pump/Service and Repair).
3. Remove the valve body bolts (374-381, 384).