G6 V6-3.9L (2009)
8. Using the J 35910 , crimp the small boot clamp (1).
Tighten the boot clamp to 176 Nm (130 lb in).
9. Measure the clamp gap width.
Clamp gap width should not exceed 2.15 mm (0.085 in).
10. Using the J 35910 , crimp the large boot clamp.
11. Measure the clamp gap width (4).
Dimension equals 2.6 mm (0.102 in).
12. Rotate the housing in a circular motion to distribute the grease in the tripot joint.