G6 V6-3.9L (2009)
1. Position the flywheel to the crankshaft.
2. Install the flywheel bolts finger tight.
3. Use the J 37096 to secure the flywheel in order to prevent the crankshaft from rotating.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the engine flywheel bolts.
Tighten the bolts to 70 Nm (52 lb ft).
5. Install the automatic transaxle. Refer to Transmission Replacement (See: Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement).