G8 V6-3.6L (2008)
19. Remove the rubber cap or plug from the BPMV (2).
20. Install the brake pipe (1) to the BPMV (2).
Tighten the brake pipe fitting to 16 N.m (12 lb ft).
21. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic Brake
System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair) .
Rear Brake Pipe Removal Procedure - Right
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Caution: Refer to Brake Fluid Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid Caution) .
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Notice: Refer to Adding Fluid to the Brake System Notice (See: Service Precautions/Technician Safety Information/Adding Fluid to the Brake
System Notice) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake
Fluid Effects on Paint and Electrical Components Notice) .
1. Clean the master cylinder, brake lines and reservoir cap.
2. Remove the master cylinder reservoir cap.