G8 V6-3.6L (2008)
4. Position the brake hose retaining bracket (2) to the inner skirt panel (1).
5. Install the brake hose retaining bracket to inner skirt panel retaining nut (5).
6. Remove the rubber cap or plug from the brake pipe fitting (3).
Important: Hold the brake hose (4) with a back up spanner whilst connecting the brake pipe fitting (3) to prevent damage to the brake
pipe fitting (3).
7. Connect the brake pipe fitting (3) to the brake hose (4).
Tighten the brake pipe fitting to 15 Nm (11 lb ft).