G8 V6-3.6L (2008)
4. Remove the plug from the power steering gear (3).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the power steering gear outlet pipe/hose to power steering gear retaining banjo bolt (2) and NEW copper sealing washers (1).
Tighten the banjo bolt to 58 N.m (43 lb ft).
6. Remove the container from under the vehicle.
7. Install the engine splash shield. Refer to Engine Splash Shield Replacement (See: Body and Frame/Splash Guard/Service and Repair) .
8. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .
9. Remove the safety stands.
10. Lower the vehicle to the ground.