Grand AM L4-138 2.3L DOHC VIN D MFI (1994)
9. Remove the fuel rail assembly from the cylinder head.
10. Disconnect the injector electrical connectors:
^ Push in the wire connector clip, while pulling the connector away from the injector.
Continue, if complete removal of the fuel rail is required.
11. Disconnect the fuel inlet pipe from the fuel rail.
^ Use a back-up wrench on the fuel rail inlet fitting to prevent it from turning.
12. Remove the fuel return tube retainer screw and retainer.
13. Remove the fuel outlet pipe from the pressure regulator.
14. Remove the fuel rail assembly from the engine.
CAUTION
If an injector becomes separated from the fuel rail and remains in the cylinder head, both injector O-ring seals and retainer clip must be replaced.
Fuel Rail Assembly
DISASSEMBLY
1. Remove the injector O-ring seal from the spray tip end of each injector, and discard.
