Grand AM V6-3.4L VIN E (2001)
7. On the outer recliner perform the following steps:
1. Install the cable end (3) to the recliner.
2. Rotate the cable conduit 90 degrees.
3. Install the cable conduit bracket bolt (4).
Tighten the bolt to 5.5 N.m (49 lb in).
8. Adjust the front seat cushion cover to a desired appearance. Refer to Front Seat Cushion Cover Replacement.
9. Install the seat back recliner handle.
10. Adjust the seat back cover to a desired appearance. Refer to Front Seat Back Cushion Cover Replacement.
11. Install the front bucket seat.
Front Seat Back Frame Replacement
Front Seat Back Frame Replacement
Removal Procedure
1. Remove the seat back cushion cover.
2. Remove the seat back pad from the seat back frame.
3. Disconnect the lumbar support from the seat back frame, if required.
4. Remove the seat back recliner bolts.
5. Remove the seat back frame from the seat back recliner.
Installation Procedure