Grand AM V6-3.4L VIN E (2001)
1. Pull the shoulder belts away from the seat back area.
2. Position rear seat back and engage the T-hooks into the access holes in the rear shelf panel.
3. Pull forward on the top edge of the seat back along the shelf panel in order to ensure that all 4 attaching T-hooks are properly aligned.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the stationary rear seat back bolts (1) into the lower rear seat back U-brackets.
Tighten the bolts to 12 N.m (106 lb in).
5. Install the rear seat cushion.
Rear Seat Back Cover Replacement
Rear Seat Back Cover Replacement
Removal Procedure
1. Remove the rear seat back.
2. Pull the seat back pad cover over the upper loops of the seat frame.