Grand AM V6-3.4L VIN E (2001)
8. Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.
IMPORTANT: The adjuster tab must be pointing toward the front of the car after installation.
9. Connect the cruise control cable to the cruise control module by turning the cable clockwise.
10. Connect the electrical connector to the cruise control module.
11. Install the cruise control cable to the retainer clip on the engine.
12. Install the cruise control cable to the throttle body bracket pressing into place until fully seated.
13. Open the throttle body cam slightly.
14. Connect the cruise control cable to the throttle body cam lever.
15. Adjust the cruise control cable if there is any slack in the cable. Refer to Cruise Control Cable Adjustment (2.4L) or Cruise Control Cable
Adjustment (3.4L). See: Cruise Control/Cruise Control Servo Cable/Adjustments
16. Reposition the surge tank.
17. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.