Grand AM V6-3.4L VIN E (2001)
3. Install the stub shaft bearing annulus assembly (1) onto the valve stub shaft (2).
4. Install J 29810 onto the valve stub shaft.
5. Lubricate the stub shaft seal (2) with grease.
6. Install the stub shaft seal (2) into the rack and pinion gear assembly.
7. Install the retaining ring (1) into the groove in the rack and pinion gear assembly.
8. Lubricate the following items with lithium base grease:
8.1. The rack bearing (2)
8.2. The adjuster spring (3)
8.3. The adjuster plug (4)
9. Install the following items into the gear assembly:
9.1. The rack bearing (2)
9.2. The adjuster spring (3)
9.3. The adjuster plug (4)
10. Turn the adjuster plug (4) clockwise onto the rack and pinion gear assembly (1) until the adjuster plug (4) bottoms in the rack and pinion gear