Grand AM V6-3.4L VIN E (2001)
assembly (1), then turn the adjuster plug (4) back 50 degrees to 70 degrees.
11. Check the rotational torque on the pinion. The maximum pinion preload torque is 1.8 Nm (16 inch lbs.).
Important: Flush and bleed power steering system (hoses, reservoir and cooler lines) with power steering fluid GM P/N 1050017 (or equivalent
meeting GM Specification number 9985010).
12. install the adjuster plug lock nut (5) to the adjuster plug (4).
Tighten
Tighten the adjuster plug lock nut (5) to 68 Nm (50 ft. lbs.) while holding the adjuster plug (4) stationary.
Tie Rod End Replacement - Outer
-
Tools Required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
Important: Use the J 24319-B in order to separate all the tie rod ends.
1. Remove the tire and wheel.
2. Remove the nut (5) from the outer tie rod ball stud (4).
3. Loosen the jam nut (2).
4. Use the J 24319-B in order to remove the outer tie rod ball stud from the steering knuckle.