Grand Prix V6-191 3.1L VIN M SFI (1998)
9. Measure the connecting rod clearance using the following procedure:
9.1. Install all connecting rod bearings.
9.2. Lightly tap each connecting rod parallel to the crankpin in order to make sure the connecting rods have clearance.
9.3. Measure the side clearance between the connecting rod caps using a feeler gage, or dial indicator. Refer to Crankpin (Rod Side Clearance) in
Specifications for the connecting rod side clearance.
10. Install the crankshaft oil deflector. Refer to Crankshaft Oil Deflector Replacement.
11. Install the oil pump. Refer to Oil Pump Replacement.
12. Install the oil pan. Refer to Oil Pan Replacement.
