pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Coil Assembly|Page 9395 > < SIR Coil Assembly|Page 9393
Page 2
background image

^

Tools Required:
-

J 41352 Modular Column Holding Fixture

REMOVE OR DISCONNECT

1. Negative (-) battery cable.
2. Disable the SIR system; refer to DISABLING THE SIR SYSTEM.
3. Remove pinch bolt (64).
4. Inter steering shaft assembly (66) from shaft assembly (37).

NOTICE:  Once steering column is removed from vehicle, the column is extremely susceptible to damage. Dropping steering column assembly on
its end could collapse steering shaft or loosen plastic injections which maintain column rigidity. Leaning on steering column assembly could cause
jacket to bend or deform. Any of the above damage could impair steering column's collapsible design. If it is necessary to remove steering wheel,
use only the specified steering wheel puller and holding fixture. Never place column directly into a vise. Under no conditions should the end of
shaft be hammered on as hammering could loosen plastic injections which maintain steering column rigidity.

5. Lower or remove steering column from vehicle.

-

Secure steering column to modular colt holding fixture J 41352.

SIR Coil Assembly|Page 9395 > < SIR Coil Assembly|Page 9393