Grand Prix V6-191 3.1L VIN M SFI (1998)
-
Place holding fixture into vise.
Inspect
-
Steering shaft assembly for accident damage.
6. Tilt lever.
7. Two pan head tapping screws (13) from lower shroud (28).
8. Lower shroud (28).
-
Tilt shroud (28) down and slide back to disengage locking tabs.
9. Remove lock cylinder.
10. Two torx head screws (14) from upper shroud (10).
NOTICE: On designated models, trim ring must be installed in order to route wires properly. Failure to install trim ring may result in wire