GTO V8-6.0L VIN U (2005)
Front Door Interior Handle: Service and Repair
Door Handle Components
Door Handle Bracket Replacement - Inside
Door Handle Bracket Replacement - Inside
Removal Procedure
1. Remove the door energy absorber pad. Refer to Energy Absorber Pad Replacement (See: Front Door Panel/Service and Repair/Energy Absorber
Pad Replacement) .
2. Remove the 4 screws (3) attaching the inside handle bracket (1) to the trim panel (2).
3. Remove the inside handle bracket (1) from the vehicle.
4. Remove the cover (4) from the inside handle bracket (1), if necessary.
Installation Procedure