GTO V8-6.0L VIN U (2005)
1. Install the cover (4) to the inside handle bracket (1), if removed.
2. Install the inside handle bracket (1) to the trim panel (2).
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the 4 screws (3) securing the inside handle bracket (1).
Tighten the screws to 1.5 N.m (13 lb in)
4. Install the energy absorber pad. Refer to Energy Absorber Pad Replacement (See: Front Door Panel/Service and Repair/Energy Absorber Pad
Replacement) .
Lock Rod Knob Replacement - Door
Lock Rod Knob Replacement - Door
Removal Procedure