Montana V6-3.4L VIN E (2002)
Condenser HVAC: Service and Repair
TOOLS REQUIRED
^
J 38185 Hose Clamp Pliers
^
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging.
2. Drain the cooling system. Refer to Draining and Filling Cooling System.
3. Remove the cooling fans with the cooling fan shroud.
4. Reposition the hose clamps to release the radiator lower hose using the J 38185.
5. Remove the radiator lower hose.
6. Disconnect the lower transaxle oil cooler line from the radiator.
7. Remove the A/C discharge hose nut from the condenser block.
8. Disconnect the A/C discharge hose from the condenser block.
IMPORTANT: Cap or tape off the open A/C refrigerant components immediately to prevent system contamination.
9. Cap or tape off the A/C discharge hose.